Luc DESTRÉE
07-18-2003, 07:01 PM
You need ActiveSync program and configure it to allow IR
connection. But if you downloaded updates of Windows, your
virtual Port might have been disconnected; try it.
Good luck!
Best regards,
Luc
>-----Original Message-----
>Hi!
>I have a Windows (not for me to choose) NT4 (no USB!) and
a Toshiba e740 and a wireless access
>point that goes on the same net as the NT4.
>
>How can I sync the Toshiba e740???
>I know how to do a sync via 802.11b, but for that You
have to do a
>"real" sync first via cable (wich I can not do cos there
is no serial
>cradle for the Toshiba e740)
>
>HELP!!!
>
>Tomas Moberg
> /Uppsala
>
>
>.
>
connection. But if you downloaded updates of Windows, your
virtual Port might have been disconnected; try it.
Good luck!
Best regards,
Luc
>-----Original Message-----
>Hi!
>I have a Windows (not for me to choose) NT4 (no USB!) and
a Toshiba e740 and a wireless access
>point that goes on the same net as the NT4.
>
>How can I sync the Toshiba e740???
>I know how to do a sync via 802.11b, but for that You
have to do a
>"real" sync first via cable (wich I can not do cos there
is no serial
>cradle for the Toshiba e740)
>
>HELP!!!
>
>Tomas Moberg
> /Uppsala
>
>
>.
>