Hi,

trying to get the following to work:
Qtek PDA with WM 5.0 has to gprs/vpn to a cisco pix. Tried ipsec/l2tp with
no luck, anthavpn also problems so went back to pptp.
With pptp we do get a vpn connection, however when i try to do something on
the network the vpn tunnel disconnects. This is either with activesync 4.2
but also with IE to a internal website.

What can I do? What can I test?

I have to add the ip address of every server I need to connect to to my
exceptions list. Somewhere in the connections app, advanced settings, etc.

"Robsl" <Robsl@discussions.microsoft.com> wrote in message
news:BBFD5CB9-9FED-46DB-A305-3D1592C769FB@microsoft.com...
> Hi,
>
> trying to get the following to work:
> Qtek PDA with WM 5.0 has to gprs/vpn to a cisco pix. Tried ipsec/l2tp with
> no luck, anthavpn also problems so went back to pptp.
> With pptp we do get a vpn connection, however when i try to do something
> on
> the network the vpn tunnel disconnects. This is either with activesync 4.2
> but also with IE to a internal website.
>
> What can I do? What can I test?
>

Reply to message from "mike" <mike@commmcasssttt.com> (Sat, 02 Sep 2006 10:
46:39) about "Re: VPN to Cisco Pix Disconnects":

If you use the netbios name then you don't need to add the ip's to the
list. If you can use the FQDN of you servers a better way of adding
exceptions would be to use *.domain.com.


--
Eric Hicks [That_Kid] (MS-MVP Mobile Devices)

The MS-MVP Program - http://mvp.support. microsoft.com This posting is
provided "AS IS" with no warranties, and confers no rights...

----- Original Message -----
From: "mike" <mike@commmcasssttt.com> Sent: Sat, 02 Sep 2006 10:46:39
Subject: Re: VPN to Cisco Pix Disconnects

I have to add the ip address of every server I need to connect to to my
exceptions list. Somewhere in the connections app, advanced settings, etc.

"Robsl" <Robsl@discussions.microsoft.com> wrote in message news:BBFD5CB9-
9FED-46DB-A305-3D1592C769FB@microsoft.com...
> Hi,

> trying to get the following to work: Qtek PDA with WM 5.0 has to gprs/
> vpn to a cisco pix. Tried ipsec/l2tp with no luck, anthavpn also
> problems so went back to pptp. With pptp we do get a vpn connection,
> however when i try to do something on
> the network the vpn tunnel disconnects. This is either with activesync
> 4.2 but also with IE to a internal website.

> What can I do? What can I test?