have a HP IPAQ 5450, that will operate very well in WiFi mode with my
Access Point.

I have a HP IPAQ 5550, that will not operate in WiFi mode when selecting the
WLAN option from the start menu.

With the old driver I solved momentanely the problem by removing the
battery for a few seconds
and reseating it (Tips Google) !!!!!!!

With te new driver will not operate in WiFi
WLAN:
FIRMWARE 0.100.5.39
DRIVER 3.2.4.133

Couple of HP WLAN updates are applicated. I dont forgot to enter the WEP Key
for the AP into the IPAQ. I have selected the WLAN logo which has turned
green on screen however bat
the LED is not indicating connectivity and the unit will not communicate
with my Access Point.


Best Regards
daniel



"Fr Jack" <sp@mtrap.com> ha scritto nel messaggio
news:odpfu1dqfb20h2f632dc3kjm53hj4t563p@4ax.com...
> Evenin, all
>
> I'm having trouble updating my ipaq 5550 to make the wifi adaptor
> compliant with WPA.
>
> I've done a series of updates, but when I try to get any further than my
> present state, I'm stumped.
>
> My present setup is:
>
> ROM 1.10.10
> MISC XIP 4.20.14053.2
> HPC XIP 4.20.14053.2
>
> WLAN:
> FIRMWARE 0.100.5.39
> DRIVER 3.2.4.133
>
> I've tried the recommended softpaqs from the HP site, but I don't seem to
> be able to get these items to update further, despite correctly installing
> the relevant ones.
>
> The machine is functioning perfectly, otherwise.
>
> Anyone any ideas, or workarounds?
>
> TIA
> --
>
> Cheers!
> Fr Jack
> B12S (The Red Mist), CB450DX (The Moped)
> FRJACKUKRM AT GMAIL DOT COM
> Red death, to set you free